!! This website has permanently moved to this new domain: https://www.incefilter.com

Mixed Micron Cartridges in One Housing: Check the Flow Path

Do not assume that coarse and fine cartridges installed side by side create coarse-to-fine filtration. If a housing connects them as parallel flow paths, a portion of the liquid can pass through the coarse element and reach the common outlet without passing through the fine element.

This is a layout question to resolve before ordering replacement high flow filter cartridges. Confirm the internal flow arrangement for the actual housing. A vessel with several cartridge positions is not necessarily a vessel with several filtration stages.

Trace one complete path through the equipment

Ask for a section drawing showing inlet space, cartridge seals, clean-side connections and outlet. Trace where liquid goes after leaving each element. If it enters a common outlet manifold, the elements serve parallel branches. A serial arrangement requires the outlet from one stage to feed the next without an alternate path around that stage.

Special housings may have separated chambers or other internal arrangements. Their drawings and operating instructions govern. Do not infer their configuration from an exterior photograph or the number of installed elements.

Why the finest label does not rate the combined outlet

Consider a simplified example with two parallel branches and a common feed. At one particular particle size, let the branch flow rates be Q1 and Q2 and the corresponding removal efficiencies be E1 and E2. With complete outlet mixing and no additional bypass, a particle mass balance gives:

Combined removal efficiency = (Q1 × E1 + Q2 × E2) / (Q1 + Q2).

If the branches carry equal flow and their efficiencies at that particle size are hypothetically 90% and 99%, the combined result is 94.5%, not 99%. These numbers are an illustration, not INCEFILTER performance data. Actual branch flows and efficiency depend on the elements, liquid and loading conditions.

Compare more than micron labels

Micron values need an efficiency definition and test basis. Pall’s Profile II literature explains that removal ratings derived from different methods cannot simply be compared. Ask for relevant retention data and flow-versus-pressure-loss information for each proposed cartridge.

Even with matching physical dimensions, different media constructions may have different hydraulic resistance. As loading progresses, the branch distribution may change. The nominal housing flow divided by the number of elements is therefore not sufficient evidence for a mixed-element configuration.

Turn the maintenance request into a controlled decision

  • Record housing model, cartridge count, adaptor and sealing details.
  • Identify the approved cartridge code for every position.
  • State the downstream quality requirement and its measurement method.
  • Explain whether the proposal is a temporary stock substitution or a permanent process change.
  • Request the equipment supplier’s review of retention, flow distribution and operating limits.

If true staged filtration is required, ask for a configuration in which all relevant liquid passes through each intended stage. Do not improvise a mixed set to compensate for missing stock. Approval should cover the complete assembly and the acceptance test, not just the replacement element’s size.

Request an INCEFILTER configuration review

Send the housing drawing, existing cartridge codes, proposed ratings, liquid, flow range and quality target through the INCEFILTER contact page. Ask for a written recommendation before ordering. The complete-assembly pressure-drop guide supports the hydraulic part of the review.

Reference: Pall Profile II technical literature, for rating-method limitations. The parallel-flow example is an engineering mass-balance illustration, not a product test or a claim of affiliation.

TAGs: pleated liquid filter cartridges china 5 micron filter wholesaler how to choose industrial filter bags 0.22 Micron Pleated Filter Cartridges industrial liquid filter bags Polyester Felt Liquid Filter Bag Pleated Filter Cartridge Manufacturer Pleated Filter Cartridge Factory Pleated Liquid Filter Cartridges How to Choose a Reliable Pleated Filter Cartridge Manufacturer Pleated Liquid Filter Cartridges pleated membrane cartridges

Request a Quote

Our experts are here to help. We will respond within 24 hours to your request.

Get in Touch with Us

EMAIL: sales6@incefiltration.com
Mobile/WhatsApp: +86 186 3308 5625
TEL: +86 (311) 8968 1588
TIME: Monday-Friday 8:00am - 5:30pm (CST)

Request a Sample

Need a closer look? Most products have samples available to ensure you are ordering the correct product for your needs. Some restrictions may apply.

Send Us a Message

Tell us what you need, and we'll help you get quotes.

Mobile/WhatsApp: +86 186 3308 5625 Email: sales6@incefiltration.com



    Filtration Engineer
    ● Online
    ×
    WhatsApp